WattCycle 12V Deep Cycle LiFePO4 Lithium Batteries

To determine the compatibility between WattCycle LiFePO4 Battery and your device, you should consider several factors:

1) Voltage Compatibility: Ensure that the voltage output of the WattCycle LiFePO4 Battery matches the voltage requirement of the device. Connecting a battery with a different voltage could damage the device or the battery.

2) Capacity and Runtime: Check if the capacity (measured in ampere-hours, Ah) of the WattCycle LiFePO4 Battery is sufficient to meet the power demands of the device. Ensure that the battery can provide enough energy to power the device for the desired duration.

3) Physical Dimensions: Verify that the physical size and shape of the WattCycle LiFePO4 Battery allow it to fit into the battery compartment or housing of the device. Make sure there is enough space and that the battery connections align properly. (for future needs)

4) Charging and Discharging Rates: Check if the WattCycle LiFePO4 Battery can handle the charging and discharging rates required by the device. Ensure compatibility in terms of maximum charge/discharge current and recommended charging/discharging protocols.

5) Safety Considerations: Evaluate the safety features of both the lithium battery and the device to ensure they meet relevant safety standards and regulations. Consider factors such as overcharging protection, short circuit protection, and temperature management. All WattCycle Batteries are equipped with BMS system, which ensures that no safety accidents will occur during normal use.

6) Manual Recommendations: Refer to the device manual's specifications and recommendations regarding compatible battery types and models. They often provide guidance on the type and specifications of batteries suitable for use with their devices.
All in all, before buying, you just need to figure out the parameters of the connected device you want and the parameters of our battery (shown on the listing) to ensure the compatibility. Then you can safely and effectively use WattCycle LiFePO4 Battery with your devices. If you are unsure about the compatibility, consult with the WattCycle team (service@wattcycle.com) for further guidance.

To charge a 12V deep cycle battery, use a charger specifically designed for lithium batteries. Ensure that the charger’s voltage matches the battery's requirements and follow the manufacturer's instructions. Avoid overcharging and always monitor the charging process to ensure safety.

Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include WattCycle 12V lithium batteries are backed by a comprehensive five-year warranty. This warranty covers any defects in materials and workmanship, giving you peace of mind with your purchase.l the original packaging.

For a 12V trolling motor, a 12V lithium battery with a capacity of at least 100Ah is typically recommended. This ensures you have enough power for extended use and can handle the motor's current draw effectively. For larger or more demanding setups, consider a 200Ah 12V deep cycle battery for additional run time and performance. If you have any other specific requirements, please contact us.

When a lithium battery freezes, its capacity and voltage decrease due to slowed chemical reactions, which impacts power delivery. If a fully charged battery freezes, internal expansion can occur, potentially causing damage.
WattCycle 12V LiFePO4 batteries are designed to handle extreme temperatures, operating effectively in conditions as low as -4℉ (-20℃) and as high as 158℉ (70℃). These batteries are equipped with internal resistance heating capabilities, allowing them to regulate their temperature and maintain optimal performance across various climate environments.