Two 12 volt 628 setup, both connected through bluetooth app.  Now only one battery shows through bluetooth.  Second battery no longer visible even when directly at battery pack.  How...

did this get addressed for you with parallel mode? 

It is surprisingly hard to find 16mm M8 terminal bolts, spring and washer in the USA. 

The two batteries in question are sitting at 12.4V while all the other batteries are higher at 12.7V when all are showing 99-100%

Ok I have turned on parallel mode on all batteries.  Want to make sure, should all batteries be in parallel mode in a 4S2P setup?   I'm getting conflicting instructions from Wattcycl...

I asked this question of wattcycle support a few days ago but have had no reply, so I'm asking here. Is there a way to update the firmware in the batteries? I had assumed that the app would update...

Based on reports on the internet and actual testing I have done, the F3000 ports (as well as the F3800 ports, although a different "plug") are simply 2 positive and 2 negative pins and a bunch of d...

The application has been updated to v. 25.13.2 but the problems described above remain. Parallel mode does not work correctly. No explanations from the manufacturer.

I do not have parallel mode on.  When I tried it it had no effect. But I will go and turn it on, on all the batteries.  I have also installed a new charger that gives plenty of voltage, i...

Did you check into the parallel mode settings?  https://www.wattcycle.com/community/xenforum/topic/202398/wattcycle-parallel-mode-v25928  

Hi Shawn, sorry for the major delay in answering you, but I never got a notification.  I ended up adjusting the settings on my own because Wattcycle never answered my question. The attached p...

Hi, I have a new Battery delivered in March 2026 and the App version is 25.13.1 and can report my experience is bad. Connecting and binding with manual serial number is OK but the app reports a "B...

Yes. Like what is the point of the charge and discharge buttons when blue or white? what is on? why? 

I have a 2p4s setup at 48v running my boat. I have two batteries sitting at like 70% and all the others are at 99-100%. The two batteries had been in parallel together. But they kept hitting 0 and ...

Greetings, new user here. If this topic has been posted somewhere else, I appologize in advance, but this is the first time on this forum. In short, here is my question: is there an expansion cable...

I fought with my batteries all day and finally got them to charge and discharge. The 314 would not turn on if the 100's were on and vice versa. This was during initial set up with a new Victron Mul...

I just commissioned a system with 10 of these server rack batteries connected to a Victron Cerbo Mk2. It took a fair bit of troubleshooting, and was only finally resolved thanks to @TBone Blade 's ...

Tripp, I dont see a resolution to your issue, I also dont see a date when this occured or how long has passed. I too am having the same issue, with the app not showing any data. My app does show a...

@chemikalguy Got it! We've passed this along to the dev team. Thanks for the suggestion!