@Scott Good Got it! We've passed this along to the dev team. Thanks for the suggestion!

:) Hey everyone, We recently developed a DIY expansion cable for EcoFlow Delta 2/3 — and honestly, it blew up way faster than we expected (sold out pretty quickly). Now we’re getting ...

@buckster  I uninstalled the WattCycle app (25.12.13) then reinstalled it.  While logging in, I allowed the app to use the Bluetooth on the phone.  I was able to connect to the batte...

I have installed the app and registered the purchase (one 314 mini BT) but can not get the app to recognize the battery.  There is voltage (13.2v) on the terminals.  I am hesitate to inst...

Please add these 2 units to the roster of upcoming products. 

I'm looking to purchase 2 - 628ah batteries and a charger.  Has anyone shipped anything to Canada? Does anyone know where Wattcycle ships from and with who? Do they have a warehouse in the ...

Wattcycle asked me to share a few photos of the fit of this battery and box as installed on 8 rails. The box also has plenty of headroom, despite the battery sitting on a 5/8" wood retention cradle.

I have determined that the Mini battery line fits perfectly into a Camco Dual Battery Box #55374, which in turn fits perfectly into a standard 8" trailer tongue battery rail. This despite the pubis...

Best chance is to remove the cover of the battery, unplug the bms and then plug it back in. It is easy to remove the cover if it has 6 little plastic plugs on top, covering screws. 

I've got a 12v 100ah battery that was fully charged and bricked itself on the way to the lake.  It shows .2v on the multimeter.  The lithium charger will not wake it up.  You can't t...

I saw that Wattcycle now has an expansion cable to add 48v server rack batteries to EcoFlow products, and wanted to see if it would be possible to get one made that would work on Anker Solix C1000 ...

I also spent a week communicating with them until I provided proof of the battery defect (I'll provide it below). The initial response from customer support was: "Regarding after-sales service: We...

I will add some information. After the problem I described above, I noticed that the percentage of charge at the end of the charging cycle gradually decreased from 98 to 75. This happened over five...

Hello,   I am just curious, has anyone had any experience getting a warranty replacement from Wattcycle?   I have been emailing them for over 1 week now and haven't even got a reply ba...

So I changed the parallel mode settings and set Compatibility Mode despite the fact that the batteries are from the same batch and production date. I see changes in the charging and discharging pro...

Schumacher sells some charger models w/little in way of voltage/current regulation. It's possible that it applied voltage that caused the bms to shut down.

Not an expert, but fr what I understand about bms, it's either ON or OFF. No throttle. Others may have better info. If its On/Off, then you probably need a dc/dc charger.

What's your situation? Batt boxes are usually used in mobile applications and the most important part of mobile installation is securing the batt(s) reliably in position to solid structure. This re...

How hard did you bump the batt terminal? Did you see sparks on the disconnect?