Another thing in the app which needs to be fixed is the charge/discharge algorithm. It appears to be out by about a factor of ten. My batteries will usually discharge about 10% per day (unless I am...
Another thing in the app which needs to be fixed is the charge/discharge algorithm. It appears to be out by about a factor of ten. My batteries will usually discharge about 10% per day (unless I am...
Four days into owning two WattCycle 25v 314ah batteries, the app has stopped working. It connects, and the batteries are working (powering the inverter) but the app -after connecting to the battery...
@Rascally Only if you're looking at 12v. Fixes are not implemented in higher voltages ...Clearly, they are still shaking out the bugs. I would not have just laid out $4,000 if I had known this.
Is there a way to turn charging off until I want it turned on again? Currently, when I turn charging off, the batteries just turn it on again as soon as the sun comes up. I want it off for two or t...
I'm told by support that the Parallel Mode is not supported by 24v batteries, only 12v. I asked if it was being implemented for 24v but have recieved no answer. So I am formally requesting it.
@Rascally , I have two 24v batteries, which apparently is not supported by Parallel Mode (only 12v?) but they are working well in parallel; they both charge and discharge at approximately the same ...
I have two 25v 314ah batteries. They appear to work quite well so far, but there is definitely no Parallel Mode being offered. After contacting support.us@wattcycle , I have been told that Pa...
@max Sopport tells me that Parrallel Mode only works for 12v batteries. (I also have two 25v 314ah batteries. They appear to work quite well so far, but there is definitely no Parallel Mode being o...
Hi, I installed two battery disconnect switches on each positive cable, and it seems to not drain as before. I can switch them on when I come back from a period of time later. Switches ...
I have the 24 volt 314ah utra. I don't see an "Exact Mode" in the app. I plan to parallel two of these batteries. Will that work?
Just finished installing one of the new version 2 105 aH batteries in a 2020 Club Car Tempo for a golfing friend. I really like the upgraded 250 amp BMS and the round SOC display that was able to f...
If I buy two 314AH Mini Smart batteries, can the iOS (iPhone) app set ExactMatch mode? I plan to wire the batteries in parallel, and need batteries to charge and discharge at the same time. ...
Thinking to buy two of these batteries, but would like to know if users have had success with the fix, and if the iOS app also has the fix. any feedback from users?
@Tim I did some math. 12ma for 24 hours is 288mah. So in 30 days, the draw would be 8.64 amp hours. If your battery is a 100ah battery, that would reduce the charge by 8.64% each ...
@Wilfried They are attempting to fix the BMS through the App. There has been a test beta version only for Android which is why people are wanting an iOS version. Apparently the iOS version is now a...
📱WattCycle Parallel Mode V25.9.28 has been officially released. New Parallel Mode with two selectable modes: ExactMatch Mode: Precisely matches all paralleled batteries of the same WattCycle br...
The note on my shunt says the 12ma current can drain some batteries in a bit over a month. A while back I built some battery monitors running on a shelly Uni. With some smart home integ...
Are we waiting for an app update or a BMS update? You want the problem of even discharging to be handled by the batteries themselves, right? So I'd think we'd be waiting for a BMS update? I don't ...
