Looking for an update on this as well. New app offers BIND. Is that locking other devices out? Some clairly on protected settings would be great. Thanks

Is it possible that the cold weather charge protection is kicking in and the batteries simply aren't charged?  In which case my 12V automatic disconnect would be awesome.  But how do I ge...

I have 2 -fairly new100Ah Wattcycle batteries.  They are in a marginally heated compartment; right now the battery temp is -3*C. I just did a drawdown test, and the batteries dropped to 12.3 ...

Can anyone tell me if the 12V 314Ah without BT has the same problume when in a parallel configuration

I have two 12V 314AH BT Batteries being charged by a 40 amp battery charger and a 80 amp alternator. Can I set the max amp charge setting to 40 amps on the batteries and protect the alternator with...

I just came across your post.  I have similar problem.  Until 23 Dec, my 300ah (280ah) would charge to 14.4v.  Starting 24 Dec it only charges to 13.6v.  Is this a failure of th...

Quick question - my two mini-bt 100ah batteries are 6% off.  Can I disable charging on the higher to allow the other to catch up if they are series?  Or does this kill the entire series. ...

@Geoffrey Bove You seem to be able to use it for 5 minutes but I don't think you can change anything. Making an account and binding the batteries took my almost 45 minutes. The camera scalling work...

@peterp That's not far from what I see. Usually not more than 5%. Sometimes a little more when you get down to around 25%

My off grid solar system all started back in Washington when needing to have a system to run my Ham radio and charge phones and HT radios in the mountains. A simple 12V Harbor Freight system was ad...

Can't you use the battery without binding?  I have been comission charging and finding that information is hard enough, but perhaps it's easy like they say, "hook it up to your alternator."&nb...

“The WattCycle App (Android) beta testing questionnaire is a great way to help shape a smarter, more user-friendly experience. While testing and sharing feedback, you can also enjoy your favo...

Thanks, @Shawn Wright yes, the parallel mode is enabled, but the batteries behave this way without it enabled anyway. They are improving as I cycle them up and down but I would like to get a better...

@WattCycle Team_Joey Was password implemented yet? I recived a new APP update but now cant use it. Needs an account but no way to create an account and my online wattcyce account does not work on t...

I have a nearly new 12v 20ah battery that is not charging.  I'm using a Schumacher 12v/10amp charger (which I've used before) but it's not taking a charge.  Battery level  reads 8.4 ...

Hi Rick, did you figure this out? I would say 400Ah should work for your setup. I have two 314Ah that I plan to parallel with a Victron shunt (for 628Ah) but have not installed them yet, so I can't...

@peterp Do you have parallel mode enabled? The manual states that it can result in this behaviour.  I have not installed mine yet, so I don't have any direct experience. 

I had issues with the app login, unable to create account, and I sent an email. Tried again later and it now works. Was able to bind my batteries, but the bar code scanner is very slow so it took s...

Also looking for a Battery Box for the 314Ah mini.