Choosing the right amp-hour rating for your trolling motor deep cycle battery is crucial to ensure you have enough power for your needs. The amp-hour (Ah) rating indicates how much current your trolling motor battery can provide in an hour, making it an essential factor in determining how long you can stay out on the water.

For example, if your motor draws 5 amps at a low speed, a 100 Ah battery would give you approximately 20 hours of runtime (100 Ah / 5 amps = 20 hours). On the other hand, if your motor draws 20 amps at high speed, the same battery would last around 5 hours (100 Ah / 20 amps = 5 hours). Understanding this calculation helps you better manage your time on the water.

A good rule of thumb is to choose a deep cycle trolling motor battery with an amp-hour rating that is at least twice the maximum amp draw of your motor. For instance, if your trolling motor draws 50 amps at full power, a 100 Ah lithium trolling motor battery would provide about two hours of runtime. However, since you likely won’t run your motor at full power continuously, you can expect longer runtimes at lower speeds. For more information on understanding battery Amp hours choose, please see our guide on Trolling Motor shopping guide.

For trolling motor use, we recommend a battery with at least a 100 amp-hour rating, a Group 24 size, and 175 minutes of Reserve Capacity (RC). The WattCycle 12V 100Ah LiFePO4 Battery with Bluetooth for Trolling Motors features a 120A BMS and is specifically designed for trolling motors.

In summary, understanding your motor’s power requirements and matching them with the appropriate amp-hour rating on your trolling motor deep cycle battery is key to enjoying a longer, more reliable experience on the water.

Our battery is BCI Group 24, with dimensions of 10.2 x 6.6 x 8.2 inches and a weight of only 23.15 lbs. It's a lightweight and compact option for your kayak trolling motor battery needs.

Yes, the WattCycle 12V 100Ah Trolling Motor Battery is designed with an IP67 waterproof rating. Under normal conditions, it can withstand brief immersion in water up to a depth of one meter without issues. You can confidently use this lithium trolling motor battery in wet environments.

Before charging, carefully inspect the charger, input cable, output cable, and output socket. Ensure the AC input and DC output terminals are securely connected. During charging, the trolling motor deep cycle battery should not be left unattended to prevent any potential hazards.

To monitor your LiFePO4 trolling motor battery, download the BMS Meta software from the Apple or Android app store. Then, connect to Bluetooth using the label on the battery’s surface. You can easily track your battery’s status anytime and anywhere through the app. For more details, refer to our Bluetooth Guide.

No, this deep cycle trolling motor battery is specifically designed for deep cycle use and is not suitable as a starter battery. Please use it only for its intended purpose.

Place the trolling motor battery in a safe, well-ventilated location on your boat. Following the guide, connect the trolling motor’s cable to the battery terminals. Ensure all connections are secure and there are no exposed wires. Turn on the motor to check its operation. If the motor does not start, verify the connections and ensure the battery is fully charged.

Our lithium trolling motor battery features an automatic recovery function for low-temperature charging protection. If the battery powers off below 0°C (32°F), it will automatically resume charging when the temperature rises to 5°C (41°F).